Floor Ceiling Dual Console
| Available In | Reverse Cycle – 5.2kW, 7.1kW |
| Refrigerant | R410A |
Key Features
The room temperature can be set to go no lower than 10°C, thus ensuring that the room does not get too cold when not occupied.
With All DC, electricity loss is decreased and power consumption reduced.
Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
The auto shut louvres close or open automatically when the unit stops or starts.
The unit automatically switches between operating modes based on the temperature setting and room temperature.
The micro-processor automatically adjusts the air flow to follow changes in room temperature.
The position of the louvres is set automatically to match the operating mode. It is also possible to adjust the louvres using the remote control.
Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
Complex swing action of the louvres enables them to swing automatically in both horizontal and vertical directions.
Limits the maximum operation current, and performs operation with the power consumption suppressed.
This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.
The right/left louvre automatically swings in either direction.
The micro-processor gradually changes the room temperature, allowing you to sleep comfortably at night.
The up/down louvre automatically swings up and down.
Different ON-OFF times can be set for up to 7 days.
Take control. Controller options.
This range is compatible with the following controller options.
AR-RAH2E
Different ON-OFF times can be set for up to 7 days.
The economy operation will save energy in heating, cooling and dry mode and is set by pressing the button on the remote control.
Weekly + Setback timer can set temperature for two time periods and for each day of the week.
UTY-LNHY
4 timer programs: On / Off / Program / Sleep Program timer: Operates ON/OFF timer once within 24 hours Sleep timer: Corrects the set temperature automatically during sleep time.
Code selector switch prevents indoor unit mix-up (up to 4 codes). Wide and precise transmitting range.
UTY-RNNYN
ON-OFF timer can be set to operate once every 24 hours.
This timer allows selection of one of four options; ON, OFF, ON to OFF, or OFF to ON.
The compressor speed and the outdoor unit fan speed are limited to reduce the operational noise.
UTY-RVNYN
An illuminated display for improved visibiltiy and clairty. Brightness and light duration can be customised to suit your preferences.
The set temperature automatically returns to the previous set temperature at the touch of a button.
Different ON-OFF times can be set for up to 7 days.
UTY-RNRYZ3
A user friendly backlit touch screen display assists with simple and easy operation.
An illuminated display for improved visibiltiy and clairty. Brightness and light duration can be customised to suit your preferences.
The micro processor gradually changes the room temperature allowing you to sleep comfortably at night.
UTY-RSRY
Large LCD screen with simple operation buttons for ease of use.
An illuminated display for improved visibiltiy and clairty. Brightness and light duration can be customised to suit your preferences.
Monitors and controls room temperature accurately.
UTY-RHRY
Large LCD screen with simple operation buttons for ease of use.
An illuminated display for improved visibiltiy and clairty. Brightness and light duration can be customised to suit your preferences.
Monitors and controls room temperature accurately.
IS-IR-WIFI-FG
The Fujitsu General anywAiR technology Wi-Fi device offers users a Wi-Fi infrared solution to remotely control the indoor comfort of their home or office.
Available for a select range of Fujitsu General air conditioning units up to 10 years old, via the free easy-to-use myanywAiR app.
View or change the temperature set point, fan speed and louver position; check the operating mode; view individual room temperatures; set timers and scenes and turn individual units on or off, anytime, anywhere.